High-Efficiency Regenerative Storage Oxidizer Catalytic Combustion Gas Garbage Rto-Incinerator

• Customization: Available
• After-sales Service: One Year
• Warranty: One Year
• Condition: New
• Certification: ISO
• Automation: Automatic
• Treatment: Burning
• Incineration Efficiency: 99.9%
• Incineration Removal Rate: 99.99%
• Processing Capacity: 5000-100000nm3/H
• Transport Package: Container Bulk Cargo
• Specification: Customized
• Trademark: WX
• Origin: Jiangsu China
• HS Code: 8417809090
• Production Capacity: 100sets/Year

Product Description

Product Description

RTO Product Description:
The operational principle of RTO is as follows: The organic exhaust gas undergoes preheating in by regenerative chamber, and then enters the oxidation chamber, where it is heated to approximately 800 ºC, so that the VOCs in the exhaust gas are oxidized and decomposed into CO2 and H2O. Subsequently, the oxidized high-heat gas passes through another regenerator for heat treatment before being discharged from the RTO system. This process is operated continuously with each regenerative chamber alternating between the mode of input exhaust gas and discharge treated gas.
This effectively reduces heat emissions after exhaust gas treatment. Simultaneously, it minimizes heat loss during exhaust gas is heating and oxidation, so that the exhaust gas maintains a high thermal efficiency (thermal efficiency of about 98%) in the process of high-temperature oxidation. The equipment is characterized by its safety, reliability, ease of operation and maintenance, low operating costs, as well as a high VOCs removal rate.

Processing objects:

Processing capacity: 5000-10000Nm3/h,equipped with zeolite rotary concentration equipment to support processing of over 100000Nm 3/h.

This advanced system is tailored to meet the rigorous demands of industries with varying waste gas compositions and volumes, providing an efficient and environmentally friendly solution for the treatment of volatile organic compounds (VOCs) and other pollutants.

Product Parameters

Operational Principle:	The organic exhaust gas is preheated in the regenerative chamber before entering the oxidation chamber for high-temperature oxidation to decompose VOCs. The treated gas undergoes further heat treatment in a regenerator before being discharged from the system.
Processing Objects:	RTO is suitable for chemical plants with various production processes like reactors, centrifuges, and coating operations. It effectively treats large volumes of low-concentration exhaust gases, typically with VOC concentrations below 5000PPM.
Processing Capacity:	RTO can handle processing capacities ranging from 5000 to 100000Nm3/h, supporting concentrations exceeding 100,000 square hours.
Technical Advantages:	Regenerative heat exchange device for rapid heating and energy-saving effects Graded combustion technology for optimal environmental protection Uniform combustion chamber temperature for complete organic oxide decomposition PLC-based automatic combustion control system for stable operation Heat energy recovery device for efficient energy utilization Efficient switch valve design for prolonged working life

Flow Chart:
For a visual representation of the RTO process, please refer to the flow chart provided by Jiangsu Wanxin Environmental Technology Co., Ltd.

Characteristics of thermal storage oxidation system:

(1) Using a regenerative heat exchange device, the heat storage carrier and the gas directly exchange heat, the furnace radiation temperature and pressure are large, and the heating speed is fast; the low-temperature heat exchange effect is significant, so the heat exchange efficiency is particularly high; the oxidation product is recovered to the maximum extent of sensible heat. It has high thermal efficiency, low exhaust smoke temperature and significant energy saving effect. Reducing fuel consumption also means reducing greenhouse gas emissions;
(2) The temperature in the regenerator increases evenly and gradedly, which strengthens the heat transfer in the furnace and improves the heat exchange effect. Therefore, the furnace volume of an oxidation furnace with the same processing capacity can be reduced, greatly reducing the cost of the equipment;
(3) Since the flame is not generated in the burner, but begins to gradually oxidize in the high-temperature regenerator in the furnace, there is no high-temperature front, so the oxidation noise is low;
(4) The high-temperature flame oxidation area is expanded, and the boundary of the flame is almost extended to the boundary of the furnace, thereby making the temperature in the furnace uniform, which on the one hand improves the purification efficiency and on the other hand extends the life of the furnace;
(5) The thermodynamic conditions are completely different from the traditional combustion process, using graded oxidation technology to delay the release of heat energy through oxidation; the temperature rise in the furnace is uniform, the heat loss is low, and the heating effect is lost. There is no longer a local high temperature and high oxygen zone that occurs in the traditional combustion process; the generation of thermal nitrogen oxides (NOX) is suppressed, and the environmental protection effect is good;
(6) The temperature in the oxidation chamber increases overall and becomes more evenly distributed; the furnace temperature can reach 760~800°C, the air flow speed is small, the oxidation speed is fast, the flue gas stays at high temperature in the furnace for a long time, and the organic matter is completely oxidized and decomposed. The environmental protection effect is remarkable;
(7) The system adopts PLC automatic oxidation control, which has a high degree of automation, stable operation, and high safety and reliability;
(8) According to the exhaust gas conditions, a heat energy recovery device can be reasonably set up, and a heat exchanger, thermal oil furnace or waste heat boiler can be connected to the high-temperature oxidation chamber; the low-temperature flue gas is used to heat the exhaust gas and make full use of the waste heat in the waste gas.

Detailed Photos

Applicable Industries:

- Chemical Processing
- Coil Coating & General Spray Painting
- Food Processing
- Laminating & Molding
- Metal Printing
- Odor Control
- Pharmaceutical Manufacturing
- Printing & Packaging
- Semiconductor Fabrication
- Environmental Remediation (Soil & Water)
- Paint Spraying
- Vinyl Flooring
- Wood Product Finishing

Our Advantages

Regenerative Thermal Oxidizer for Green Gas

Introducing the Regenerative Thermal Oxidizer from Jiangsu Wanxin Environmental Technology Co., Ltd. This innovative equipment efficiently treats organic waste gas while recovering waste heat, resulting in low operating costs and secondary heat recovery.

Application Scenario

 

Company Profile

Jiangsu Wanxin Environmental Protection Technology Co., Ltd. is located in Gaocheng Town, Yixing City, renowned as the cradle of environmental protection, adjacent to the picturesque Taihu Lake and boasting exceptional human resources. Since its establishment, Jiangsu Wanxin Environmental Protection Technology Co., Ltd. (formerly known as Yixing Incinerator Equipment Processing Plant) has been committed to the research and development, manufacturing, sales, project integration, engineering installation, scientific research, production, installation and service of medical waste incinerators as well as various solid, liquid and gaseous industrial hazardous waste incinerators and smoke pollution control equipment. Upholding a quality policy of "excellence in quality and dedication in service", we have obtained ISO9001 quality system certification. With our exceptional technology, superior quality products and excellent service delivery approach, we have gathered customer satisfaction and recognition. Our range of incinerators finds extensive application across medical facilities, daily life settings, chemical industries, airports, metallurgy plants, leather factories, textile mills, printing dyeing enterprises, food processing units, clothing manufactures, paper mills, pharmaceutical companies,footwear producers, and other hazardous waste incineration fields.
The company adheres to the enterprise mission of "contributing to the environmental protection cause of our motherland and creating b better future for the Earth." With the enterprise goal of "manufacturing China's best incinerator," it is striving towards becoming a high-tech green environmental protection base that integrates internationalization, scale, collectivization, and standardization. We warmly welcome new and old friends to visit our company, conduct burning tests, engage in research activities, and jointly create a blue sky that belongs to all of us!

Certifications

 

FAQ

Q: How to buy your idea products? 
A: You can provide us what kind of waste and the waste weight you want to burn per day (connect us for more details).  We will send you a questionnaire to fill in.  Then our engineer will design the suitable solutions for you and prepare to give you best price. 

Q: How to pay? 
A: TT and L/C are acceptable and TT will be more appreciated.  The payment rate shall be negotiated according to the situation. 

Q: What is the delivery time? 
A: It depends on our order quantities and the specification of your incinerator. 

Q: How to package the product? 
A: We use standard seaworthy package combined with container and bulk. 

Q: How to keep your equipments from corrosion? 
A: We use the world-famous paint according to your requirements and paint strictly according to the standard process. 

Q: How to install after the equipments arriving destination? 
A: We will provide detailed illustrations to you such as the video technical support and online support.  If the furnace size is large enough, we will send a technician to guide for installation and debugging .  After debugging equipment, he will teach your workers how to use it and how to maintain.