Honeycomb Activated Carbon Vocs Removal Air Filter Odor Control

• Customization: Available
• Appearance: Cellular
• Application Area: Chemical Industry, Electric Power Industry, Environmental Protection Industry, Gold Industry
• Model NO.: wx carbon
• Iodine Value: <600 mg/g
• Particle Size: 1-2mm
• Ph Value: 7-9
• Specific Surface Area: 500-800 m�/g
• Usage: Air Purification, Gas Phase Adsorption, Water Treatment
• Transport Package: Paper Box
• Specification: 100*100*100mm
• Trademark: WX
• Origin: China
• HS Code: 3802109000
• Production Capacity: 5000t/Year

Product Description

Honeycomb activated carbon can be widely used in various gas purification equipment and waste gas treatment projects, practice has proved that the purification effect is better than ordinary.
Honeycomb activated carbon has the characteristics of large specific surface area, small through-hole resistance, developed micropores, high adsorption capacity, long service life, etc., and is widely used in air pollution control. The selection of honeycomb activated carbon adsorption method, that is, the waste gas and the porous activated carbon with a large surface contact, the pollutants in the waste gas are adsorbed, so as to play a purification role.

It can be used directly or into the purification cabinet, adsorption bed use, if the concentration of exhaust gas is high, the emission is large, two purification cabinets, adsorption bed can be used alternately. In the process of use, try to avoid the temperature is too high, the temperature is too high will reduce the adsorption amount, the adsorption amount decreases with the temperature rise; At the same time, it is necessary to avoid high dust content and oil fog, because the tar dust fog will block the activated carbon micropores, increase resistance, and reduce the adsorption effect, if the use of the environment contains a lot of concentrated dust and tar, should be installed before the dust filtration to achieve the best use effect and the longest service life.
 

Main component	Activated carbon	Normal compressive strength	Greater than 0.8MPa
Common specification	50*50*100mm, 100*100*100mm	Service temperature	Less than 300 degrees Celsius
Pore density	100 holes/square inch, 150 holes/square inch	Empty tower wind speed	0.8 m/s
Specific surface area	More than 700 square meters per gram	Appearance	Flat surface, no cracks